We know that, iphone batterylife is limited, therefore, use a period of time, the battery will fail. For iphone users, when their battery is broken, in fact, iphone parts are normal, but they do not want to replace the new phone, then in this case, the user only needs to replace the iphone battery on it. So how to replace their iphone battery? The following iphone 6s, for example, step by step to teach you how to replace the iphone battery!

How to replace the battery to the iPhone 6s? Teach you how to do!

Before dismantling iphone 6s to prepare the tools: screwdriver, sucker, pry bar, dial and other appropriate tools.

First remove the two screws at the bottom with a prepared five-point screwdriver.

iphone battery

Then use the suction cup to dismantle the screen. Note that there is a glue around the edge of the screen fixed, first of its softening. You can use a large tile hair dryer, or use a wind gun for assistance.

iphone battery

After softening with a strong pull sucker to make it appear a gap

iphone battery

Insert the pry bar when a gap appears

iphone battery

Then you can use the pry bar to carefully open around pry. It should be noted that if the feeling of glue hardened with a hair dryer or air gun for heating and then dismantling.

iphone battery

iphone battery

iphone battery

iphone battery

iphone battery

iphone battery

iphone battery

iphone battery

iphone battery

 

When the screen can be opened when the glue has been out of the fixed

iphone battery

Carefully open the screen, because the screen is still connected to the cable at this time can not be reckless to remove the screen

iphone battery

Remove the suction cup and carefully open the screen

iphone battery

You can see the screen cable is a metal bracket fixed to the motherboard.

iphone battery

At this time the screen will be erected behind the things with the mat to prevent the screen twist tear cable

iphone battery

You can see the battery cable seat is also a metal bracket fixed, so to remove the metal bracket disconnect the power (note that the removal of the screw must remember that the location removed, can not remember to draw to the paper Screws into the corresponding position)

iphone battery

Remove the screw and remove the metal bracket with tweezers

iphone battery

iphone battery

Use the pry bar to pry open the power cable

iphone battery

iphone battery

iphone battery

As the battery is not very good so remove the screen here also removed (the old driver should not need to dismantle the screen can be replaced). Screen cable also has a metal bracket fixed, so also remove the fixed bracket. (Note that the removal of the screw must remember to remove the location, and can not remember to draw the paper into the screw on the corresponding location)

iphone battery

Remove the metal bracket with tweezers

iphone battery

Remove the metal bracket can be used to pry open the screen row of cable buckle

iphone battery

 

iphone battery

iphone battery

iphone battery

All the cable are disconnected after the screen can be removed

iphone battery

Next, we disassemble the battery, use forceps to peel off the linear motor next to the fixed battery tape

iphone battery

Peeled after the hand can pull the two tapes, in fact, this is the bottom of the battery easy to pull tape.

iphone battery

iphone battery

iphone battery

Two easy to pull all the tape after pulling out with the help of the pry bar can remove the battery

iphone battery

Remove the old battery to install the new battery on it.

iphone battery

After the battery is installed, do not connect the cable to the first to install the screen first

iphone battery

With the help of the pry bar on the screen one by one button on the cable

iphone battery

iphone battery

iphone battery

When all the screen cable to the buckle after the buckle is not put on the metal bracket

iphone battery

iphone battery

And then according to dismantling the location of the corresponding one-to-one screw installed (remember the painting in accordance with the current position and placed under the dismantling of the screws installed)

iphone battery

Installed the next screen with a pry bar to the auxiliary cable to the battery cable and motherboard connected to power.

iphone battery

iphone battery

Installed power cord buckle card after the boot test, if no problem next to install the battery buckle card on the metal bracket. The screw is also loaded in the removed position.

iphone battery

iphone battery

iphone battery

Then cover the screen to reset it. It should be noted that: If the edge of the screen glue is not recommended to install the screen in front of the screen edge plus a little repair

iphone battery

When the screen covering the composite with a hair dryer around the heated, and then something with a soft pad to press around with Qiao Jin. Note Do not use excessive force, if there is a place not to press the convex, with a pry bar to help re-set the screen to reproduce the complex.

iphone battery

Finally, the bottom of the two screws installed on ok.

Well, for being ready to replace their iphone 6s battery users, may wish to follow the above steps to do.